Since 2004, HUDA has been focusing on innovation in environmental test machine, battery test machine, rubber and plastic testing machines, UTM, etc., with rich experiences and a proactive attitude.
Lab test machines manufacturers & suppliers
Universal Testing Machine / UTM / Tensile Test Machine / Single Column
This machine is a computer servo type tensile testing machine, which uses a motor to drive the screw to move the clamp. Place the sample test fixture installed between the upper and lower clamps, and then apply the specified speed. When the upper clamp stretches the sample upward, The load cell at the upper end of the upper fixture feels the pulling force; it converts the force into a voltage signal and transmits it to the display. As a result, the imported force sensor is connected to the display to automatically display the force value.
According to the standard: GB/T16491-2008
Reference standards: ASTM D903, GB/T1040, GB/T8808, GB13022, GB/T 2790/2791/2792, CNS-11888, JIS K6854, PSTC-7.
200 kg (2KN)
Germany brand load cell for high accuracy
PC with windows 7 system or windows 10 system
Panasonic servo motor w/AC variable speed drive system, high-precision mechanical ball screw rod
kgf, Ibf, N, KN, T etc
900mm including fixture
Load cell Resolution
Load- elongation, Elongation-time, Time-elongation, Stress-strain
Max. force, speed, sample information, strength(Kpa, Mpa, N/mm, N/mm2) etc…
3.Upper and lower limit switches
4. Load sensor with automatic retreat