Lab test machines manufacturers & suppliers

Home / all / Battery Test Machine /

Battery Explosion-Proof Testing Machine丨Dual Anti-Explosion Test Chamber

Battery Explosion-Proof Testing Machine丨Dual Anti-Explosion Test Chamber

Battery Explosion-Proof Testing Machine丨Dual Anti-Explosion Test Chamber
Battery Explosion-Proof Testing Machine丨Dual Anti-Explosion Test ChamberBattery Explosion-Proof Testing Machine丨Dual Anti-Explosion Test ChamberBattery Explosion-Proof Testing Machine丨Dual Anti-Explosion Test ChamberBattery Explosion-Proof Testing Machine丨Dual Anti-Explosion Test ChamberBattery Explosion-Proof Testing Machine丨Dual Anti-Explosion Test Chamber
CategoriesBattery Test Machine
BrandHUDA Test Machine Manufacturer
ModelHUD-H203
Inner box size500x500x500mm
Dimension680x750x1475mm
External materialcold-rolled steel plate with paint treatment, thic
Internal materiaSUS#304 thickness 1.2mm
Number of cabinets2
Control modemetal button control
FOB portshenzhen
Terms of PaymentL/C, D/A, D/P, T/T, Paypal
Update Time2022/5/21
Detail Information
Battery Explosion-Proof Testing Machine

Battery Explosion-proof Testing Chamber is mainly used for charging and discharging of battery.Put the battery in explosion-proof chamber and connect charge and discharge tester to protect the operator and equipment. The body is made of steel material with strong texture and well explosion protection.

Test Standard

  • UN38.3(2012) "Recommendations on the Transport of Dangerous Goods-Manual of Tests and Standards" Part III
  • IEC62133-2012 "Safety requirements for batteries and battery packs containing alkaline or non-acid electrolytes"
  • GB/T 31485-2015 "Safety requirements and test methods for power batteries for electric vehicles"
  • GB31241-2014  "Safety requirements for lithium-ion batteries and battery packs for portable electronic products"
Parameters

1. Inner chamber size

 500x500x500mm (width x depth x height);

2. Dimensions

 680x750x1475mm (width x depth x height, including door lock);

3. External material

 cold-rolled steel plate with paint treatment, thickness 1.5mm;

4. Internal material

 SUS#304 thickness 1.2mm;

5. Number of cabinets

 2;

6. Box door

 a single door opens to the left, and an explosion-proof chain is installed on the side of the box door;

7. Teflon tape is attached to the inside of the box, which is effective in insulation and flame retardant, easy to clean;

8. There are test holes on the left side of each layer of the box, which is convenient for the test connection line to pass through;

9. Each test box has a lighting and smoke exhaust interface, and there is an interval design between each layer to avoid mutual influence on the test;

10. Control mode

 metal button control ;

11. Pressure relief door size

 200x200mm; Located at the back of the box, when the sample explodes, the pressure relief port will pop open to relieve the pressure;

12. Smoke exhaust pipe

 diameter φ100mm, located at the back of the box;

13. Observation window

 Two-layer tempered glass with a size of 250x250mm, equipped with stainless steel mesh;

14. Equipment movement

 There are four universal casters at the bottom of the equipment, which can move freely;

15. Lighting device

 It is convenient to observe the state of the tested sample;

16. Power supply

 1∮; AC220V; 50-60HZ

Details

Observation Window

Easy to observe the condition of the sample at any time

Inner Chamber

SUS#304 thickness 1.2mm

Double Handle

Silicone compression strip + explosion-proof chain handle

Separate Exhaust & Lighting System

Independent setup and testing
Find what you want! Contact us to know more!
*Email
Tel
*Title
*Content

Since 2004, HUDA has been focusing on innovation in environmental test machine, battery test machine, rubber and plastic testing machines, UTM, etc., with rich experiences and a proactive attitude.

News