Lab test machines manufacturers & suppliers

Home / all / Battery Test Machine /

Battery Crush Nail Penetration Test Machine

Battery Crush Nail Penetration Test Machine

Battery Crush Nail Penetration Test Machine
Battery Crush Nail Penetration Test MachineBattery Crush Nail Penetration Test MachineBattery Crush Nail Penetration Test MachineBattery Crush Nail Penetration Test MachineBattery Crush Nail Penetration Test Machine
CategoriesBattery Test Machine
BrandHUDA Test Machine Manufacturer
ModelHUD-H212
Inner dimensions520x450x560mm
Outside dimensions800x700x1720mm
Drive modeServo motor drive
Force range1~20kN
Extrusion stroke250mm
Material of inner chamberSUS#304, thickness 1.2mm
FOB portshenzhen
Terms of PaymentL/C, D/A, D/P, T/T, Paypal
Update Time2022/5/21
Detail Information
Battery Crush Nail Penetration Test Machine

Battery Crush Nail Penetration Test Machine is suitable for simulating the squeezing and acupuncture of various batteries during use, transportation, storage or disposal under certain temperature conditions. And judging the battery safety performance.

Test Standard

 UN 38.3 "United Nations Manual of Transport Tests and Standards for Dangerous Goods"

 IEC62133 "Battery (group) composed of batteries and safety requirements for portable equipment"

 UL 1642:2012 "Lithium Battery Standard"

 GB/T 31485-2015 "Safety requirements and test methods for power batteries for electric vehicles"

 GB/T 31241-2014   "Safety requirements for lithium-ion batteries and battery packs for portable electronic products"

Video
Operations

Battery should be tested in an environment of 20℃±5℃.  Place the battery connected to the thermocouple (the contact of the thermocouple is fixed on the large surface of the battery) in a fume hood, and pierce the largest surface of the battery with a non-corrosive steel needle with a diameter of 2-8mm at a speed of 25mm/s Keep it at the center of the battery for any time and observe the test results. 

The battery is qualified as no disintegration, no rupture, and no fire.

Parameters

1. Drive mode

 Servo motor drive;

2. Control method

 PLC touch screen control;

3. Force range

 120kN;

4. Extrusion stroke

 250mm;

5. Force value display

 touch screen display;

6. Extrusion head

 Extrusion head area ≥20cm²;

7. Extrusion degree

 Extrusion pressure reaches 13±0.2kN, keep for 1min;

8. Test space

 200x200x200mm (width x depth x height)

9. External material

 A3 steel plate and painted, thickness 1.5mm;

10. Material of inner box

 SUS#304, thickness 1.2mm;

11. Steel needle

 φ2mmφ8mm high temperature resistant steel needle, the length is 100mm (optional);

12. Inner dimensions

 520x450x560mm (width x depth x height);

13. Outside dimensions

 800x700x1720mm (width x depth x height, including door lock);

14. Pressure relief door size

 200x200mm;

15. Smoke exhaust pipe

 diameter φ100mm, located at the back of the box;

Features

* Safety Alarm Device

Electrical leakage

Over voltage

Overload and over temperature

Over current protection

Abnormal sound and light alarm

Smoke alarm lamp


* Exhaust system

It is equipped with an exhaust fan and an duct at the back of test chamber. There is an air inlet on the left side of the chamber. After the test, the air inlet can be opened to achieve rapid exhaust of the smoke in the chamber.

 

* Pressure Relief Port

Located at the back of test chamberφ200mm, when the pressure inside of chamber is large, the safety door will be opened automatically, it can release the pressure inside of chamber


PLC Touch Screen

Easy to operate

Test Area

SUS#304, thickness 1.2mm

Observation Window

Explosion-proof glass 

protective steel mesh

Find what you want! Contact us to know more!
*Email
Tel
*Title
*Content

Since 2004, HUDA has been focusing on innovation in environmental test machine, battery test machine, rubber and plastic testing machines, UTM, etc., with rich experiences and a proactive attitude.

News